Accessories	Bicycles	Parts	Specials	Tools

In West Newton Since 1952 - On The Web Since 1995

Search HarrisCyclery.com Search WWW

Harris Cyclery Tandem Parts

by Sheldon Brown

Brakes | Cables | Cranks | Crank Shorteners | Eccentrics | Hubs | Stokid Kits | Trailercycles

This page is under construction. We stock many tandem specific parts, and, as time permits, they will be listed on this page.

This site features several very informative Tandem Articles

We ship hard-to-find parts, tools and accessories all over the world

Cantilever Brakes

Cables

CA1371 QBP Stainless Slick ® premium inner tandem brake cables

These are very high-quality rust-proof cables. The cables are die-drawn to smooth out their surface for reduced friction. Double-ended, for road or mountain levers.

CA5006 QBP Stainless Slick ® premium inner tandem gear cables

These are very high-quality rust-proof cables. The cables are die-drawn to smooth out their surface for reduced friction.

Crank Sets

See the QBP Special Order Section

Stokid Clamp-on Bottom Bracket Shells

For child stokers age 5-10

These fit most tandems that don't have a pair of "mixte " stays.

For 28.6 mm (1 1/8") Seat Tubes	CR8950
For 31.8 mm (1 1/4") Seat Tubes	CR8951
For 35.9 mm (1 3/8") Seat Tubes	CR8952

Crank Shorteners

Crank shorteners clamp on to your existing cranks, and allow the pedals to be attached closer to the center of rotation. This allows a young child to pedal the back of a tandem that otherwise might be a bit too large. "Ride2" crank shorteners These fit pretty much any standard crank. They have 4 different pedal holes, allowing the cranks to be effectively shortened by 24, 41, 59 or 76 mm. , 308 grams. See the QBP Special Order Section

Eccentrics Building your own tandem? You'll want an eccentric bottom bracket. This unit consists of a steel shell with an aluminum eccentric. The steel shell is a simple piece of tubing, with no holes, ready for TIG welding or fillet brazing. Drill and tap the shell for grub screws to retain the eccentric, or cut slots in it and braze on ears for pinch-clamps. The eccentric itself is very nicely machined from aluminum, and fits standard 68 mm bottom brackets.

We specialize in fixed-gear conversion of road and mountain bikes...

Check our page of Fixed Gear Goodies!

Copyright © 2005, 2008 Harris Cyclery