| Accessories | Bicycles | Parts | Specials | Tools |
|---|
 In West Newton Since 1952 - On The Web Since 1995 |
|---|
Brake Cable Hardware
Adjusters | Cable Ends | Cable Clips
Cable Hangers f/Cantilevers | Donuts | Ferrules/Crimps | Yokes
| Accessories | Bicycles | Parts | Specials | Tools |
|---|
In West Newton Since 1952 - On The Web Since 1995 |
|---|
Cable Hangers f/Cantilevers | Donuts | Ferrules/Crimps | Yokes
These minor items are so cheap we don't charge for a few of them. If you want a large quantity, you can buy them by the bottle.
Ferrules 5 mm
Ferrules help keep the cut housing end aligned with its stop hardware, helping reduce cable friction.They are essential for index housing to keep it from fraying.
A few? Free (with other purchase).
Bottle of 200 $21.95
CAH40
Crimps
Crimps-squish these onto the cut ends of your cables to prevent fraying/unraveling of the cable.A few? Free (with other purchase).
Bottle of 500 $17.95
CAH42
Donuts
Rubber donuts slide onto your cables where they run bare, especially along the top tube. The donuts keep the bare cables from rattling against the frame, and also protect the paint from abrasion. A few? Free (with other purchase).
Bottle of 600 $37.95
CAH45
CAH31 "Mickey" Barrel Adjuster Conversion Kit $3.95 Each
This unit is intended to fit into a top-tube cable stop and provides a fingertip adjustment for your rear brake. This is very desirable on drop-bar conversions of bicycles originally built for upright bars (upright-bar brake levers usually incorporate a barrel adjuster, while drop-bar levers do not.)
CAH59 Fork Crown Housing Stop $9.95 Each
This unit allows you to use traditional cantilevers or center-pull cantilevers without a housing stop on the headset. It is designed to bolt onto the front of the fork crown. This can solve a number of problems, and can improve cable routing by letting the cable get around even a low handlebar stem without a sharp kink.This is not intended for use with suspension forks. It may be possible to make it work with some suspension forks by mounting it on the upside-down "U" bridge that connects the legs, but it must not be mounted on the fork crown of a suspsension fork as it will cause unpredictable brake application as the fork responds to bumps.
CAH60 Fork Crown Housing Stop $10.95 Each
Similar to CHA59, above. Sleeker design. Includes cable adjuster and two recessed nuts of different lengths.
Hardware for Traditional Cantilevers and Center-pull Calipers.
BRH27 Cable Hanger (Front Housing Stop) $5.95
Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes.
Mounts on 1" threaded fork steerers. 3mm thick. Ideal for headsets with minimal stack height adjustment.
Can also be easily modified to fit 1" threadless fork steerers by filing off the little tab in the hole.
Includes adjusting barrel.
Steel, silver only.
BRH28 Alloy Cable Hanger (Front Housing Stop) $9.95
Headset-mount front cable hanger (housing stop) for traditional cantilevers and centerpull caliper brakes.
Mounts on 1" threaded fork steerers. 5mm Thick.
Can also be easily modified to fit 1" threadless fork steerers
by filing off the little tab in the hole.Includes adjusting barrel.
Silver
BR9999 Surly Long Rear Housing Stop $10.95
Seatpost-bolt mount rear cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes.
This housing stop loops over the seatpost bolt between the "ears" of the seat lug/seatpost clamp.
Includes adjusting barrel.
This is rather long (76.5mm), which is good news and bad news:
Stainless Steel with aluminum adjusting barrel.
- Good News: improved cable routing for smoother brake operation.
- Bad News: For smaller frames, there may not be sufficient clearance between the seatpost bolt and the cable yoke.
BRH29 Dimension Rear Housing Stop $5.95
Seatpost-bolt mount rear cable hanger (housing stop) for tradtitional cantilevers and centerpull caliper brakes.
Mounts on seatpost bolts up to 6 mm in diameter. If your seatpost bolt is thicker, you'll need to drill or ream the hole out larger.
The tab that goes onto the seatpost bolt is 3 mm thick, make sure there's room to fit it between the "ears" on your bike.
No provision for an adjusting barrel. Adjustment screw on the bottom is primarily to adjust the angle for smooth cable routing.
Aluminum
Tektro Deluxe Yoke Silver BRH05 $6.95
These premium quality cable yokes are a great choice for traditional cantilever and centerpull caliper brakes.
The two small grub screws let you secure the transverse cable so it won't slide. This helps keep the brakes centered.Sold individually. Each comes with a single-ended, braided transverse cable, 2.5 mm Allen wrench for the grub screws and a cable crimp.
The Phillips head screw on the back side is for securing the excess brake cable.
BRH19 Odyssey Cable Knarps $5.95/pair
These bolt-on cable ends can solve a number of problems. They're primarily intended to fit into upright-handlebar brake levers.We mainly feature them for replacement of old-style Raleigh double-ended brake cables.
Allen wrench shown included. Dime $.10 extra.
CAB525 Stainless Steel Cable Clip Set $9.95
Set of three traditional brake cable clips.Fits 1" top tube. Nuts and bolts included.
Need a good cable cutter? Click Here!
More Cable Doodads from the Quality Special Order Catalogue
Ordering, Feedback, Questions?
Web site by Sheldon Brown
URL: http://harriscyclery.com/cable-hardware-brake.htmlCopyright © 2005, 2008, 2011, 2012 Harris Cyclery
